K & N Minator Alloy Wheels (correct fitment for Hijet)

View previous topic View next topic Go down

K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by dazbaby1 on Wed Feb 13, 2013 10:12 am

Hi All,
Just to advise that I have a set of the above alloy wheels that are UK manufactured together with tyres (Nankang 165/70/x12) in almost new condition with minimal wear to tyres and no corrosion or kerbing. The wheels are around 3 - 4 mths old. They are on Ebay - item 140916510709 and I am asking £260.00 with the buyer to organise their own courier to collect. Very rare wheels (same style as minilites) and no longer available for Hijets.
Regards
Darren


Last edited by dazbaby1 on Wed Feb 13, 2013 5:56 pm; edited 1 time in total

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Logi on Wed Feb 13, 2013 10:32 am

Hi, we spotted them already, but the general feeling was they were a wee bitty dear?
avatar
Logi
Jet Warrior

Posts : 3577
Join date : 2011-04-07
Age : 81
Location : Kilmarnock

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by HighlyJetted on Wed Feb 13, 2013 3:52 pm

Yes, some pictures would be good too.
avatar
HighlyJetted
Hijet Overdose

Posts : 5410
Join date : 2009-10-06
Age : 34
Location : Such a Dick

http://www.daihatsuhijet.co.uk

Back to top Go down

Photo's

Post by dazbaby1 on Wed Feb 13, 2013 5:47 pm

Hi,
There are a couple of photo's of the wheels on Ebay and If anyone is interested in them just send me an email address and I will happily send close ups when the snow stops and there is some daylight available.
Cheers
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Logi on Wed Feb 13, 2013 5:55 pm

Actually just looked again, on Ebay you're either asking £1040 for a set or you have 4 sets? Laughing


(or you've f***ed up the listing... Wink )
avatar
Logi
Jet Warrior

Posts : 3577
Join date : 2011-04-07
Age : 81
Location : Kilmarnock

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by dazbaby1 on Wed Feb 13, 2013 6:29 pm

Hi,
I see what you mean - it's a strange anomoly of the listing but now corrected.
Cheers for the heads up.
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by HighlyJetted on Wed Feb 13, 2013 7:10 pm

Yeah they are in beautiful condition!

They will also fit:-

Daihatsu Cuore L201, L501 & L601
Daihatsu Cuore Move L80
Mazda RX7 from 1978 till 1983
Toyota Corolla models KE10, KE11, KE15, KE16, KE17, KE18, KE20, KE25, KE26 from 1970′s and 80′s
avatar
HighlyJetted
Hijet Overdose

Posts : 5410
Join date : 2009-10-06
Age : 34
Location : Such a Dick

http://www.daihatsuhijet.co.uk

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by PFM on Wed Feb 13, 2013 7:46 pm

RX7 on 12" wheels? affraid You sure?

PFM
Jet Addict

Posts : 1446
Join date : 2010-04-24
Age : 56
Location : East Sussex

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by HighlyJetted on Wed Feb 13, 2013 8:11 pm

Well they will bolt onto the hubs... clear the brakes - i'm not sure!
avatar
HighlyJetted
Hijet Overdose

Posts : 5410
Join date : 2009-10-06
Age : 34
Location : Such a Dick

http://www.daihatsuhijet.co.uk

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Logi on Wed Feb 13, 2013 8:52 pm

Waste of good wheels putting them on anything other than a Hijet Wink
avatar
Logi
Jet Warrior

Posts : 3577
Join date : 2011-04-07
Age : 81
Location : Kilmarnock

Back to top Go down

NEW PHOTO'S

Post by dazbaby1 on Fri Feb 15, 2013 4:13 pm

HI All,
I've taken some fresh photo's in better light and after a quick wash - the last two shows the tyre manufacturer and the fact that they are low noise tyres.
I have also dropped the price just a wee bit as a gesture but I won't go any lower as the wheels really are in mint condition and well worth the price.
Cheers
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by HighlyJetted on Fri Feb 15, 2013 8:10 pm

I hope you have patience because at that sort of money it might take a little while before the right guy comes along.

I don't think they are over priced really, but your average hijet owner is a stingy tight arse who expects almost a whole van for £250 not just a set of wheels.

If you wait and keep them advertised then someone will show - but you should add "pcd4x110" to the auction title as they may end up selling outside of the hijet market first.
avatar
HighlyJetted
Hijet Overdose

Posts : 5410
Join date : 2009-10-06
Age : 34
Location : Such a Dick

http://www.daihatsuhijet.co.uk

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by dazbaby1 on Mon Feb 18, 2013 10:44 am

Hi,
Yes you guy's don't spend your money easily - I guess I will have to reduce the price 'a little' sob, sob.....
I have enabled 'sensible' offers to be made on the wheels if you fancy a punt - check Ebay.
Cheers
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by HighlyJetted on Mon Feb 18, 2013 11:57 am

If the tyres are in really good condition then I wouldn't take that much less for them. Maybe £200.

If you bought them new, it will be painful though. But you always lose money on wheels if you buy them new.

I've only bought one set of new when I was 18, and lost loads of money on them, since then I've done alright finding bargains and normally selling them later for what I paid for them, or even slightly more.
avatar
HighlyJetted
Hijet Overdose

Posts : 5410
Join date : 2009-10-06
Age : 34
Location : Such a Dick

http://www.daihatsuhijet.co.uk

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by dazbaby1 on Mon Feb 18, 2013 12:02 pm

Aye you are probably right - the wheels and tyres are mint really, never even bumped a kerb. I will take a minimum of £225.00 so if anyone wants them hit the button on Fleebay.
Cheers
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Guest on Sat Feb 23, 2013 2:26 am

Well the burning question you still haven't answered Darren is : DID YOU SELL THEM? If you didnt then let me know and if you will parcel them up I am more than interested in them at £225. Will need to have a rough idea of the weight though, Woody 50 on 07863030309

Guest
Guest


Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by dazbaby1 on Sat Feb 23, 2013 6:53 am

Hi there,
Yes wheel sold to a nice chap who travelled all the way from Chorley to Sunderland to pick them up.
If you are not fast you're last.
Cheers
Darren

dazbaby1
Member

Posts : 7
Join date : 2013-02-13

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Logi on Sat Feb 23, 2013 7:00 am

Hopefully you told him.about the forum?
avatar
Logi
Jet Warrior

Posts : 3577
Join date : 2011-04-07
Age : 81
Location : Kilmarnock

Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Guest on Sat Feb 23, 2013 9:46 am

Oh pooo! but good for you. Thanks for the post Darren. Anyone else out there got any 12" correct pcd Hi-Jet wheels for sale ?

Guest
Guest


Back to top Go down

Re: K & N Minator Alloy Wheels (correct fitment for Hijet)

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum